Subaru Crosstrek Oil Capacity Guide & Specs
What is the oil capacity of a 2024 Subaru Crosstrek? It is 4.7 quarts. Knowing your Subaru Crosstrek’s oil capacity is key for its engine’s health.
Regular oil changes, every 7,500 to 10,000 miles, are vital. The right oil keeps your engine running smoothly and lasts longer.
In this guide, we’ll cover everything about your Subaru Crosstrek’s engine oil. This includes manufacturer specs, how to check your oil, and the best oil type for your car.
We’ll also show you how to change your oil and share tips to avoid mistakes. This guide is for both DIY experts and new car owners.
It will help you maintain your Crosstrek confidently, saving you time and money.
Introduction to Subaru Crosstrek Engine Oil Capacity
The Subaru Crosstrek’s engine oil capacity is key to its performance and life span. It’s vital to keep the engine oil at the right level.
This helps reduce wear and friction on important parts. Subaru suggests checking the oil level every other time you fill up.
They also recommend using Genuine Subaru Oil for the best engine protection. A study by Idemitsu Lubricants America in 2017 showed its superior quality.
Regular oil changes are essential for the best performance. The maintenance schedule and oil quality work together.
A visit to a Subaru service center for a free multi-point inspection is a good idea. It checks fluid levels, including engine oil.
What’s Subaru Crosstrek Oil Capacity?
Knowing the oil capacity is key to keeping your Subaru Crosstrek’s engine healthy. The oil capacity definition is how much oil your engine can hold.
It’s vital for your engine to work right. If you put in the wrong amount, it can hurt your car’s performance.
What is Oil Capacity?
The Subaru Crosstrek’s oil capacity changes with the model and engine. Knowing the right amount prevents problems like bad lubrication or too much pressure.
Too little oil means your engine might overheat and get damaged. Too much oil can cause aeration, which hurts engine protection by making lubrication less effective.
Importance of Correct Oil Capacity
Keeping the proper oil level is very important. If it’s too low or too high, it can cause big problems. A low level can make parts wear out faster.
For the Crosstrek, following the manufacturer’s advice helps your car last longer and run better.
| Oil Type | Change Interval | Notes |
|---|---|---|
| Synthetic Oil | 7,000 to 15,000 miles | Dependent on driving conditions |
| Conventional Oil | Every 5,000 miles | Typically for regular use |
| Recommended Service | Every 6,000 miles or 6 months | Whichever comes first |
Subaru Crosstrek Oil Capacity
Knowing the Subaru Crosstrek oil capacity is key to keeping your engine running well. Check the manufacturer’s oil recommendations for your model year.
The 2024 Subaru Crosstrek usually needs about 4.7 quarts of oil. But, the exact amount can change based on the engine type.
Always check your owner’s manual for the exact Subaru Crosstrek oil specifications.
Manufacturer Specifications
Following the manufacturer’s guidelines is important for proper maintenance. Each Subaru Crosstrek has its own oil needs, based on its year and engine.
For example, the 2024 model often requires 0W-20 oil for best performance. Remember, oil changes should happen every 7,500 to 10,000 miles or every 6 to 12 months.
Keeping track of your car’s mileage helps you stay on schedule, protecting your engine.
How to Check Your Oil Level
It’s vital to regularly check your Subaru Crosstrek’s oil level. Here’s how to do it right:
- Make sure the engine is off and your car is parked on level ground.
- Open the hood and find the Subaru Crosstrek dipstick.
- Take out the dipstick, clean it with a cloth, and put it back in fully.
- Take the dipstick out again to see the oil level; it should be between the marks.
- If the oil level is low, add oil slowly until it’s just right.
By keeping an eye on your oil levels, you can make your engine last longer and run better.
Recommended Subaru Crosstrek Oil Type
The Subaru Crosstrek needs specific oil types for the best engine performance and life. The recommended oil is 0W-20 synthetic oil.
This oil works well in many driving conditions and saves fuel. For warmer climates or heavy towing, consider 5W-30 oil. It protects better at high temperatures.
Here’s a quick reference table summarizing the Subaru Crosstrek oil grade specifications:
| Oil Type | Viscosity | Use Case |
|---|---|---|
| Synthetic Oil | 0W-20 | Standard driving conditions for optimal performance |
| Synthetic Oil | 5W-30 | Hot climates or towing heavy loads |
| Conventional Oil | 5W-30 | General use for engines with low to average mileage |
Choosing the right oil and following the oil grade specs is key. Regular oil changes keep your engine running well. This is important for your car’s performance and life.
Subaru Crosstrek Oil Change Process
Changing your Subaru Crosstrek’s oil is key to keeping the engine running well. This guide will walk you through the DIY oil change steps and picking the right oil filter.
Steps For an Effective Oil Change
- Gather your materials: the recommended oil (between 4.7 to 5 quarts for the 2023 model), an oil filter, an oil catch pan, a funnel, and necessary tools.
- Warm up the engine slightly before draining the oil to ensure smooth flow.
- Lift the vehicle and securely use jack stands. Locate the oil drain plug, remove it, and allow the oil to drain completely.
- Replace the old oil filter with a new one. Proper Subaru Crosstrek oil filter selection is key for top engine performance.
- Reinstall the drain plug, add new oil through the oil filler cap, and check the oil level with the dipstick to ensure it’s at the correct capacity.
Choosing The Right Oil Filter For Your Crosstrek
Choosing a high-quality oil filter is vital during the oil change. Look for brands like Mobil 1 and Royal Purple. Consider how well it filters and how long it lasts under engine stress.
Changing the oil filter with every oil change boosts your engine’s efficiency and life. Use Subaru Crosstrek’s oil filter selection guidelines to pick the right one for your model.
Subaru Crosstrek Maintenance Schedule
Keeping up with your Subaru Crosstrek’s maintenance is key to its long life. You should change the oil every 6,000 miles or every six months, whichever happens first.
If you drive a lot in city traffic or tow heavy loads, you might need to do it more often. Using synthetic oil lets you go longer between oil changes.
You can go up to 7,000 to 15,000 miles without needing an oil change, depending on how you drive and where you go.
Regular maintenance keeps your car running well and saves you money. The Subaru Crosstrek costs about $8,210 in maintenance and repairs over ten years.
This is $40 less than other SUVs. But, there’s a 23.97% chance your Crosstrek might need a big repair in ten years. This is a bit worse than other cars.
In the first five years, you’ll spend about $2,548 a year on maintenance and repairs. There’s only a 7% chance of a major repair.
This is 24% better than other cars, making the Crosstrek a good choice. Following the recommended maintenance schedule helps your car last longer. It keeps it running smoothly for years to come.
Identifying Subaru Crosstrek Oil Drain Plug and Dipstick
To do an oil change on your Subaru Crosstrek, you need to know where the oil drain plug and dipstick are. Start by getting under the car to find the oil drain plug.
It’s a big bolt at the oil pan’s bottom. This plug lets you drain the old oil for new one. The dipstick is key for checking oil levels. It has a bright yellow or orange handle.
You’ll find it near the engine. Checking it often helps keep your engine oil at the right level, which is good for your car.
Knowing where these parts are makes oil changes easier. It also helps keep your car in top shape.
Subaru Crosstrek Oil Refill Process
Refilling oil in your Subaru Crosstrek is key for your engine’s health. Doing it right can make your car last longer. Knowing the right tools and tips makes the job easier.
Tools and Equipment Needed
To refill oil correctly, you’ll need these tools:
- New engine oil (0W20, full synthetic recommended)
- A clean oil funnel for easy pouring
- An oil catch pan to prevent spills
- Wrenches suitable for the drain plug (17mm)
- A clean rag or paper towels for cleanup
Tips For a Successful Oil Refill
Follow these tips for a successful oil refill:
- Always check the owner’s manual for specific oil capacity, which is 5.1 quarts for the 2020 Subaru Crosstrek.
- Add oil slowly, frequently pausing to check the level with the dipstick.
- After refilling, run the engine briefly to circulate the oil and then recheck for any leaks around the oil filter and drain plug.
- Be cautious not to over-tighten the drain plug. Tighten until it feels secure, then add a quarter-turn.
- Dispose of any old oil according to local environmental regulations.
Avoiding Common Oil Change Mistakes
To keep your Subaru Crosstrek running well, it’s key to avoid common oil change errors. Many people forget to check the oil level before and after changing it.
This is important for your engine’s health and performance. Another mistake is using the wrong oil type. Using oil not recommended by Subaru can wear down your engine faster.
Always check your owner’s manual or ask a pro to make sure you’re using the right oil. Some folks also forget to replace the oil filter during oil changes.
A dirty or low-quality oil filter can block oil flow, damaging your engine. It’s vital to replace the oil filter regularly for your Subaru’s best care.
Overfilling or underfilling the oil reservoir is another problem. Too much oil can cause pressure and foam, while too little can lead to poor lubrication.
Always check the dipstick to ensure the oil level is right before driving. Knowing these common mistakes can help keep your engine healthy and improve your Subaru Crosstrek’s performance.
Conclusion
Knowing how to maintain your Subaru Crosstrek is key to its performance and life span. Regular oil changes are a must.
They should happen every 7,500 to 10,000 miles or every 6 to 12 months, based on how you drive. Following these guidelines boosts your car’s performance.
It also keeps the engine running smoothly and prevents damage. The process of changing oil is simple.
For a 2019 Subaru Crosstrek, it costs between $54 to $69 for 5.1 quarts of oil. You’ll also need to spend about $8 to $10 for a new oil filter.
Choosing high-quality oil and filters made for your car model is wise. This is even more important if you drive off-road.
Keeping up with these maintenance steps will make your Suzuki a reliable choice for many years. In short, regular oil changes and following the manufacturer’s advice are essential.
They keep your Subaru Crosstrek’s engine running well and its value high. With consistent care, you’ll enjoy a smooth ride and support Subaru’s reputation for reliability.
FAQs
What is the oil capacity for a Subaru Crosstrek?
The Subaru Crosstrek’s oil capacity varies. It’s about 5.1 to 5.8 quarts. This depends on the engine model and year.
What type of oil should I use in my Subaru Crosstrek?
Use 0W-20 synthetic oil in your Subaru Crosstrek. For hotter climates or heavy towing, 5W-30 is okay.
How often should I change the oil in my Subaru Crosstrek?
Change your oil every 6,000 to 7,500 miles. This depends on how you drive.
How do I check the oil level in my Subaru Crosstrek?
First, make sure the engine is off and the car is on level ground. Pull out the dipstick and wipe it clean. Then, put it back in and check the level. It should be between the marks.
Where is the oil drain plug located in a Subaru Crosstrek?
The oil drain plug is at the bottom of the oil pan. You can find it by sliding under the car.
What are the steps for changing the oil in a Subaru Crosstrek?
Start by gathering what you need. Warm the engine. Then, remove the oil drain plug to drain the old oil. Next, replace the oil filter. Put the drain plug back in, add new oil, and check the level.
How can I ensure a successful oil refill in my Subaru Crosstrek?
Use the right amount of oil as shown in the owner’s manual. Add oil slowly. Check the level with the dipstick. And, make sure there are no leaks after running the engine a bit.
Why is it important to follow the manufacturer’s oil specifications?
Following the manufacturer’s oil specs is key. It keeps your engine running well, protects it from wear, and saves fuel.
